JVC UXQD90S - Manual (Page 74)

Introduction
13
(Continued)
Connections
CAUTION
• Do not short-circuit the and speaker termi-
nals. Doing so may damage the main unit.
• Do not connect other speakers together with the
supplied speakers. The change in impedance
may damage the main unit and the speakers.
• The speakers of this product are magnetically
shielded, but color irregularities may occur on the
TV depending on how the speakers are installed.
Keep in mind the following.
1. Turn off the main power of your TV before
installing the speakers. Wait for about 30 min-
utes before turning on the TV again.
2. If color irregularity occurs in pictures, keep
enough distance between the TV and the
speakers.
NOTE
• Improper speaker cord connection spoils the stereo
effect and sound quality.
• The impedance of speakers connected to this
product must be within the range of 4 Ω to 16 Ω.
• A cooling fan is built into the main unit. The inter-
nal cooling fan automatically rotates to dissipate
generated heat. To ensure sufficient cooling,
leave a space of at least 1 cm between the main
unit and the speakers or other objects.
Connect all necessary parts before connecting the power plug.
Connecting the Speakers
After connecting the speakers, gently pull on the
speaker cords to make sure that they are firmly
connected.
Speaker cord
Speaker cord
Red
Black
Red
Black
Right speaker (rear view) Left speaker (rear view)
Speaker cord
Main unit (rear view)
You can detach the speaker cover.
Speaker
cover
UX-QD90[UG_UX]-03.fm Page 13 Monday, September 12, 2005 12:01 PM