Spirit XBR95 - Manual (Page 16)

12
Fitness Bike
XBR95
The 1/4-mile track (one lap) will be displayed around the dot matrix window. The flashing
segment indicates your progress. Once the 1/4-mile (Metric - 0.4k) is complete this feature will
begin again. There is a lap counter in the message window for monitoring your distance.
1/4 Mile Track
The Pulse (Heart Rate) console window will display your current heart rate in beats per minute
during the workout. You must use both stainless steel sensors on the front cross bar or the heart
rate transmitter chest strap to display your pulse. Pulse value displays anytime the upper display is
receiving a Pulse signal. You may not use the Grip Pulse feature while in Heart Rate Programs.
Note: Refer to Important Safety Instructions (page 2) concerning Pulse Grip operation.
Pulse Grip Feature
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions, which cannot be used for
medical purposes.
Calorie Display
The console has built-in Speakers. You may plug an Audio Source (CD player, MP3, Computer,
etc.) into the Jack on the right side of console. There is no volume control on the console. The
volume must be controlled on the Audio Source.
Speakers
Dot Matrix Center Display
Twenty columns of boxes (8 high) indicate each segment of a workout. The boxes only show an
approximate level (resistance) of effort. They do not necessarily indicate a specific value - only an
approximate percent to compare levels of intensity. In Manual Operation the resistance dot matrix win-
dow will build a profile “picture” as values are changed during a workout.
The speed and incline profiles will display half of the program at one time (9 columns). They will both
scroll right to left. The Lap track will move in a counterclockwise direction.