Spirit XBR95 - Manual (Page 9)

5
Fitness Bike
XBR95
1. Attach the Rear Stabilizer (7) to the Main Frame (1) with the four Hex Head Bolts (65) and four Flat Washers
(84). Tighten completely with the wrench (112).
2. Attach the Seat Back (5) to the Seat Carriage (4) of the main frame. Slide a Hex Head Bolt (67) through each
side, then attach a Nyloc Nut (89) to each bolt. Tighten the bolts just enough so there is no side to side play, but
freedom of movement front to back. Use the wrenches provided (112 & 130).
HARDWARE
STEP 1: Rear Stabilizer & Seat Back
#89.ƒ3/8” x 7T
Nyloc Nut
(2 pcs)
#84.ƒ3/8” x 25 x 2T
Flat Washer
(4 pcs)
#65. 3/8” x 2-1/4”
Hex Head Bolt (4
pcs)
#67.ƒ3/8” x 4”
Hex Head Bolt
(2 pcs)