Sony DSR-DR1000 - Manual (Page 102)

102
Specifications
SC: ±180°
* Adjust with menu settings.
** Adjust with controls on the front panel.
Audio performance
Frequency response
Two-channel (48 kHz) mode:
20 Hz to 20 kHz ±1.0 dB
Four-channel (32 kHz) mode:
20 Hz to 14.5 kHz ±1.0 dB
Dynamic range More than 87 dB
Distortion (THD + N)
Less than 0.07% (48 kHz)
Input connectors
Digital signal inputs
SDI IN BNC type
SDI format (270 Mbps), SMPTE 259M/
CCIR656-III
AUDIO (AES/EBU) IN
BNC type (×2), complying with AES-
3id-1995
S400(i.LINK) 6-pin, complied with IEEE 1394
Analog video inputs
REF. VIDEO IN
BNC type (×2, loop-through with 75
Ω
automatic terminator)
Black burst
0.286 V (DSR-DR1000) or 0.3 V
(DSR-DR1000P), 75
Ω
, negative sync
Composite sync
VIDEO IN BNC type (×3 and 1 loop-through
connector with 75
Ω
automatic
terminator), composite/component/S-
video switchable
Composite Y/CPST and 1 loop-through connector
with 75
Ω
automatic terminator: 1.0
Vp-p, 75
Ω
, sync negative
Component Y/CPST: 1.0 Vp-p, 75
Ω
, negative sync
R
−
Y/S
−
C and B
−
Y/S
−
Y: 0.7 Vp-p (75%
color bars for DSR-DR1000 or 100%
color bars for DSR-DR1000P), 75
Ω
S-video Y/CPST: 1.0 Vp-p, 75
Ω
, negative sync
R
−
Y/S
−
C: 0.286 Vp-p (DSR-DR1000)
or 0.3 Vp-p (DSR-DR1000P), 75
Ω
(burst level)
Analog audio inputs
AUDIO IN XLR 3-pin, female (×2), +4/0/
−
3*/
−
6
dBm, high impedance, balanced
* For DSR-DR1000 only
Time code input
TIME CODE IN
BNC type, SMPTE time code (DSR-
DR1000) or EBU time code (DSR-
DR1000P), 0.5 Vp-p to 18 Vp-p, 3.3
k
Ω
, unbalanced
Network
100BASE-TX/10BASE-T
RJ-45 type
100BASE-TX: complied with IEEE
802.3u
10BASE-T: complied with IEEE 802.3
Output connectors
Digital signal outputs
SDI OUT BNC type (×2)
SDI format (270 Mbps), SMPTE 259M/
CCIR656-III
AUDIO (AES/EBU) OUT
BNC type (×2), complying with AES-
3id-1995
S400(i.LINK) 6-pin, complied with IEEE 1394
Analog video outputs
VIDEO OUT BNC type (×3), composite/component/
S-video switchable
Composite Y/CPST, and SUPER: 1.0 Vp-p, 75
Ω
,
sync negative
Component Y/CPST: 1.0 Vp-p, 75
Ω
, negative sync
R
−
Y/S
−
C and B
−
Y/S
−
Y: 0.7 Vp-p (75%
color bars for DSR-DR1000 or 100%
color bars for DSR-DR1000P), 75
Ω
S-video B
−
Y/S
−
Y: 1.0 Vp-p, 75
Ω
, negative sync
R
−
Y/S
−
C: 0.286 Vp-p (DSR-DR1000)
or 0.3 Vp-p (DSR-DR1000P), 75
Ω
(burst level)
Analog audio outputs
AUDIO OUT XLR 3-pin, male (×2), +4/0/
−
3*/
−
6 dBm,
600
Ω
loading, low impedance,
balanced
MONITOR Phono jack,
−11 ∗∗
dBu (DSR-DR1000)/
−9
∗∗
dBu (DSR-DR1000P) ±1 dB, 47
k
Ω
, unbalanced,
−20
dBFS (DSR-
DR1000)/
−18
dBFS (DSR-1000P)
* For DSR-DR1000P only
** With the PHONES control knob at the center position