Sony DSR-DR1000 - Manual (Page 90)

90
Connections for an A/B Roll Editing System
Settings on this unit (player) Connection of a video monitor
Set up the following connections between the video
monitor and recorder to enable monitoring of video and
audio signals on a video monitor. In addition to the video
and audio signals, you can have time data, the operation
mode of the unit, alarm messages, and other information
displayed as text on the monitor screen by setting the
CHARA. DISPLAY menu item (see page 66) to ON
(factory default setting).
Switch/menu item Setting
Control mode selector REMOTE
OUTPUT LEVEL menu item
(see page 71) Normally
+
4 dBm
VIDEO OUTPUT menu item
(see page 72) Y
−
R, B
(Y
−
R,B indicator lights.)
AUDIO OUTPUT menu item
(see page 72) 1/2 CH or 3/4 CH
(CH 1/2 or CH 3/4 indicator
lights.)
VIDEO
OUT
B-Y/CPST
(SUPER) MONITOR
2 1
75
Ω
termination switch: ON (or attach a 75
Ω
terminator)
Input switches: Set according to the type of input signals.
Video monitor
Audio input Composite
video input
A Cable with RCA phono plugs
(not supplied)
B 75
Ω
coaxial cable
(not supplied)
DSR-1500A/1500AP (recorder)