Sony DSR-DR1000 - Manual (Page 71)

71
Menu Contents
SRCH CONTROL [>Srch ctrl]: Select the frame display style
during high-speed searching.
* BLEND [>>blend]: Display frames blended with each other.
CLEAR [>>clear]: Display frames independently with no
noise.
AUDIO CONTROL [Audio]: Settings related to audio
control Description of settings
REC MODE [> REC mode]: Select the audio recording mode. * 2 CHANNEL (48kHz) [>> 2 ch]: 2-channel, 48-kHz mode
4 CHANNEL (32kHz) [>> 4 ch]: 4-channel, 32-kHz mode
INPUT ARRANGE [> Input arng]: Make settings for input
audio mixing.
Note
When, in 4-channel mode, analog audio is selected for all four
channels (channels 1/2 and 3/4), the same analog audio
signals are recorded on channels 1 and 3 and on channels 2
and 4, respectively. That is, the analog signal recorded on
channel 1 is also recorded on channel 3 and the analog signal
recorded on channel 2 is also recorded on channel 4.
You can adjust the audio level on each of the four channels
separately using the REC/PB LEVEL control knobs with the
VARIABLE switch set to REC.
Set the channels on which to record the input audio signals as
follows.
(1) Use the cursor/clip operation buttons
to move the cursor
and the SET button to toggle the setting on and off.
(2) To save the settings, press the MENU button to return to
the previous screen, then press the SET button.
Example settings:
LEVEL SELECT [> Level Sel] REF LEVEL [>> REF
Level]:
Select the audio
reference level
(headroom) for
recording.
* –20 dB [>>> –20dB] (factory default setting for DSR-
DR1000)
* –18 dB [>>> –18dB] (factory default setting for DSR-
DR1000P)
–16 dB [>>> –16dB]
–12 dB [>>>–12dB]
CH1 IN LEVEL [>> CH1
input]:
Select the audio level
setting according to the
audio level of the signal
input to the AUDIO IN
1/3 connector.
* +4 dB [>>> +4dB]
0 dB [>>> 0dB]
–3 dB [>>> –3dB] (for DSR-DR1000P only)
–6 dB [>>> –6dB]
CH2 IN LEVEL [>> CH2
input]:
Select the audio level
setting according to the
audio level of the signal
input to the AUDIO IN
2/4 connector.
* +4 dB [>>> +4dB]
0 dB [>>> 0dB]
–3 dB [>>> –3dB] (for DSR-DR1000P only)
–6 dB [>>> –6dB]
OUTPUT LEVEL [>> Out
Level]:
Select the analog
audio output reference
level.
* +4 dB [>>> +4dB]
0 dB [>>> 0dB]
–3 dB [>>> –3dB] (for DSR-DR1000P only)
–6 dB [>>> –6dB]
VIDEO CONTROL [Video]: Settings related to video control Description of settings
AUDIO INPUT SOURCE
ARRANGE
in1 in2 in3 in4
ch1:*on
ch2: on on
ch3:
ch4 on
ON/OFF : SET KEY
TO MENU : MENU KEY
on
1
2
3
4
1 Input audio channel 1 (“in1”) is recorded on audio channel 1
(“ch1”) on tape.
2 Input audio channels 2 and 4 (“in2” and “in4”) are recorded
mixed on audio channel 2 (“ch2”) on tape.
3 Input audio channel 4 (“in4”) is recorded on audio channel 3
(“ch3”) on tape.
4 Input audio channel 3 (“in3”) is recorded on audio channel 4
(“ch4”) on tape.