Sony DSR-DR1000 - Manual (Page 76)

76
Changing Menu Settings
1
Press the MENU button in the menu control section.
The menu selection level display appears on the
monitor.
In the figure below, “SETUP MENU” is selected
(shown in reverse video).
The time counter display of this unit shows only the
currently selected item. When the item name is long,
it is abbreviated.
2
With “SETUP MENU” selected, press the k (OUT)
button.
This displays all items on menu level 1.
3
Press the k (OUT) or j button to select the required
item.
4
Press the k (OUT) button.
This displays menu level 2 for the menu item selected
in step
3 .
5
Press the J (CUE) or j button to select the item
whose setting you wish to change.
For menu items on level 3, press the k (OUT) button
to go to level 3, then press the J (CUE) or j button to
select the item whose setting you wish to change.
6
Press the k (OUT) button.
This displays all possible settings for the item selected
in step
5 .
MENU RESET SET
CUE
IN OUT
8
3,5,7
2,4,6
9
1
Setup menu SYSTEM MENU
SETUP MENU
TC PRESET
DISK MENU
NETWORK MENU
DATE/TIME PRESET
HOURS METER
Monitor screen
Time counter display
Menu selection level display
Operational SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
SETUP BANK OPERATION
MENU GRADE :BASIC
Monitor screen
Time counter display
Level-1 menu display
Display SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
SETUP BANK OPERATION
MENU GRADE :BASIC
Time counter display
Monitor screen
Example: Display when “DISPLAY CONTROL” is selected
> Chara disp SETUP MENU
DISPLAY CONTROL
CHARA.DISPLAY
CHARA.POSITION
CHARA.TYPE
CHARA.VSIZE
DISPLAY INFO
SUB STATUS
MENU DISPLAY
PEAK HOLD
OVER DISP HOLD
BRIGHTNESS
ALARM
:ON
:WHITE
:x1
:T&STA
:OFF
:WHITE
:OFF
:OFF
:75%
:ON
Time counter display
Monitor screen
Current settings
Example: Level-2 display for “DISPLAY CONTROL”
> Brightness SETUP MENU
DISPLAY CONTROL
CHARA.DISPLAY
CHARA.POSITION
CHARA.TYPE
CHARA.VSIZE
DISPLAY INFO
SUB STATUS
MENU DISPLAY
PEAK HOLD
OVER DISP HOLD
BRIGHTNESS
ALARM
:ON
:WHITE
:x1
:T&STA
:OFF
:WHITE
:OFF
:OFF
:75%
:ON
Time counter display
Monitor screen
Example: Display when “BRIGHTNESS” is selected