Socket Mobile SDIO - Manual (Page 13)

STEP 5: Insert the Card
Important!
Do NOT insert the card upside down or shove the card in too hard.
Damage may occur!
Pocket PC 2003 only: Wait for the device reset to finish before you
insert the card!
Insert the card into your mobile computer’s slot. Make sure the card is
right-side up, with the blue label on top.
Insert a CompactFlash or SDIO card directly into a slot of its size. When
properly inserted, the CF card will be fully contained within the slot,
whereas the SDIO card will protrude a little from the slot.
After the mobile computer recognizes the card, the Bluetooth icon w
appear in the task tray (visible in the Today screen).
ill
CHAPTER 2: BASIC SETUP | 13