Socket Mobile SDIO - Manual (Page 25)

¾ METHOD 1: TAP ON THE CONNECTION ICON
a) Tap on the Connection icon in the navigation bar at the top of the
screen. It should have an “X” to show that you are not connected.
b) A bubble should appear with the dial-up connection you just created.
Verify the phone number, then tap on the phone number. The phone
will try to connect.
Note:
• Multiple connections may be listed. Tap on the phone number of
the connection you want to dial.
• If the connection you want is not listed, tap on Settings. Tap
Manage Existing Connections and select the connection you want
to use. Tap ok.
c) Depending on your phone and connection settings, you may need to
enter a passkey and/or a password before the phone will start to dial:
• If you have a Nokia 3650/6310/7650/8910/8910i or Motorola
Timeport 270C, you must complete the bonding process:
a. The first time you try to connect, the phone will ask if you
want to bond. On Motorola, enter GRANT; on Nokia, enter
ACCEPT.
b. Make up a 4-16 digit passkey, enter it on the phone, then enter
it on the Pocket PC.
c. After successfully bonding with your phone, you may want to
set up your phone for automatic connections. See Appendix C,
“Automatic Phone Connections,” for instructions.
CHAPTER 2: BASIC SETUP | 25