Chapter 6 the socket dialer, Assign a dialing prefix – Socket Mobile SDIO User Manual

Page 63

Advertising
background image

Chapter 6 The Socket Dialer



This chapter explains how to assign a dialing prefix and use the Socket
Dialer to dial a number directly from your Contacts list. The Socket Dialer
makes it quick and easy to perform dial-up networking.

If you have not done so already, be sure to run the Dialer Installer from the
Socket Bluetooth Card Installation CD. While installing the program, you
can also assign the dialing prefix.

Note: The Socket Dialer has been verified to work with Nokia and Ericsson
phones and is known not to work with the Motorola 270c, NTT Docomo
Paldio 633S or Sony au C413S phone. Results may vary with other phones
that are not listed as being supported by the Socket Bluetooth system.

Assign a Dialing Prefix
If you have not already assigned a dialing prefix during the install process,
you can do so by following these steps:

1. Go to Start | Settings | System. Tap on Socket Dialer.

2. Select the appropriate Dialing Prefix, then tap ok.

CHAPTER 6: THE SOCKET DIALER | 63

Advertising