SATO CL408e - Manual (Page 16)

OPTIONAL ACCESSORIES
SATO CL Series “e” Printers PN 9001074 Rev. B Page 1-7
Section 1. Printer Overview
ACCESSORY CL408 CL412 CL608 CL612
MEMORY EXPANSION One slot for PCMCIA Memory Cards (up to 16 MB Flash or 4 MB
SRAM) and/or 4MB internal Flash ROM. Can be used for Graphic File
storage, print buffer expansion, format storage and downloaded
TrueType fonts.
CALENDAR An internally mounted Date/Time clock that can be used to date/time
stamp labels at the time of printing.
LABEL CUTTER Internal attachment allowing labels to be cut at specified intervals.
Controlled through programming.
LABEL DISPENSER Internal attachment allowing
labels to be peeled from backing
for immediate (on demand)
application. Internal backing
take-up. Internal attachment allowing
labels to be peeled from backing
for immediate (on demand)
application. Backing take-up
mounted externally to rear of
printer.
LABEL REWINDER External option rewinds labels onto a roll after they are printed.
PARALLEL INTERFACE IEEE1284 Parallel Interface Module
SERIAL INTERFACE High Speed Serial RS232 Interface Module
UNIVERSAL SERIAL I/F USB Interface Module
ETHERNET INTERFACE 10/100BaseT Interface Module
COAX/TWINAX INTERFACE Coax/Triax Interface Module. Coax I/F emulates an IBM 3287-2
printer with a standard Type A BNC connector. Twinax I/F emulates
IBM 5224, 5225, 5226 or 4214 printers with auto-terminate/cable-thru
capabilities.
All specifications subject to change without notice.