SonicWALL Internet Security Appliances - Manual (Page 240)

Hardware Descriptions Page 241
SonicWALL PRO 100 Front Panel
The SonicWALL PRO 100 front panel is shown below, followed by a description of each item.
SonicWALL PRO 100 Front Panel Description
• Power
Lights up when power is applied to the SonicWALL PRO 100.
• Test
Lights up when the SonicWALL PRO 100 is first powered up and performing diagnostic tests to
check for proper operation. These tests take about 90 seconds. If the Test LED remains lit after
this time, the software is corrupt and must be reinstalled.
There are three Ethernet ports; one for each of the LAN, DMZ, and WAN ports:
• Link
Lights up when the Twisted Pair port is connected to a 10Mbps or 100Mbps hub or switch, or
directly connected to a computer. Note that the connected Ethernet device must support the
standard Link Integrity test.
• 100
Lights up when the Twisted Pair port is connected to a 100Mbps hub or switch or directly
connected to a computer with a 100Mbps network interface.
• Activity
Flashes when the SonicWALL PRO 100 transmits or receives a packet through the Twisted Pair
port.
Power LED WAN Port LEDs
Link, 100, Activity
DMZ Port LEDs
Link, 100, Activity
LAN Port LEDs
Link, 100, Activity
Test LED