Sonicwall soho3 and tele3 front panel, Sonicwall soho3 and tele3 front panel description – SonicWALL Internet Security Appliances User Manual

Page 248

Advertising
background image

Hardware Descriptions Page 249

SonicWALL SOHO3 and TELE3 Front Panel

The SonicWALL SOHO3 front panel is shown below, followed by a description of each item. The
SonicWALL TELE3 is identical to the SonicWALL SOHO3 except for the TELE3 label on the front panel
and the inclusion of SonicWALL VPN.

SonicWALL SOHO3 and TELE3 Front Panel Description

Power
Lights up when power is applied to the SonicWALL SOHO3 or SonicWALL TELE3.

Test
Lights up when the SonicWALL is first powered up and performing diagnostic tests to check for
proper operation. These tests take about 90 seconds. If the Test LED remains lit after this time,
the software is corrupt and must be reinstalled. There are two Ethernet ports: one of the
following for the LAN and WAN ports:

Link
Lights up when the Twisted Pair port is connected to a 10Mbps or 100Mbps hub or switch or
directly connected to a computer. Note that the connected Ethernet device must support the
standard Link Integrity test.

100
Lights up when the Twisted Pair port is connected to a 100Mbps hub or switch or directly
connected to a computer with a 100Mbps network interface.

Activity
Flashes when the SonicWALL transmits or receives a packet through the Twisted Pair port.

Power LED

WAN Port LEDs
Link, 100, Activity

LAN Port LEDs
Link, 100, Activity

Test LED

Advertising