Sampo DVE-6xx - Manual (Page 13)

12
p Audio Output Terminals and Connections
1 Stereo Audio Output Terminals (L/R) Ê
Use stereo output terminals for connection with your television or other non-Dolby Digital A/V receivers or amplifiers.
These terminals provide down-mixed Dolby Digital audio signals for standard 2-channel playback.
1 Dolby AC-3 5.1 Channel Analog Audio Output Terminals Ë
(5.1ch Model Only)
Use Dolby AC-3 5.1channel analog audio outputs for connection with a Dolby Digital Ready A/V receiver or
amplifier with 5.1 channel input connections. This option will utilize the DVE-660’s built-in Dolby Digital Decoder to
decode Dolby Digital audio from the DVD.
1 Optical Ì and Coaxial Í Digital Audio Output Terminals
Use digital audio outputs for connection with an external Dolby Digital or DTS decoder. To use the optical output, you
will need to purchase a TOSLINK fiber optical cable. To use the coaxial output, you will need to purchase a coaxial
cable.