Sampo DVE-6xx - Manual (Page 6)

5
DISC CARE
p Disc Usage
1 Please hold all discs by their edges or the center
opening as shown below. Do not touch the shiny surface
of the discs.
1 Do not stick labels or tape on the discs, and do not
scratch or damage the discs.
1 The disc spins at a high speed during playback. Do not
use damaged, cracked, or warped discs because they
could damage the unit.
p Disc Cleaning
1 Fingerprints or dirt on disc surfaces can weaken the light
reflected from the disc and directly influence the signal
quality. The poorer the signal quality, the poorer the
playback performance. Keep the disc clean by wiping it
straight out from the center with a dry soft cloth.
1 If the disc is very dirty, wipe with a moist soft cloth, then
follow with a dry soft cloth.
1 Do not use record cleaning sprays, benzene, thinner,
anti-static electricity liquids, or any other solvent.
These may damage the disc surface.
p Disc Storage
1 Please keep the discs in their original cases to avoid
bending the discs. Do not keep discs in locations with
high temperature, high humidity, or direct sunshine.
These conditions may also cause damage to the discs.
1 Carefully read all instructions on the disc label.