Sampo DVE-6xx - Manual (Page 33)

32
SPECIFICATION
Power requirement 100-240 V ~, 50/60 Hz
Power consumption 26 W (approx. 6W at standby mode)
Weight 4.2Kg (5.1ch model)
Dimensions (W x D x H) 430x310x91 (mm)
Operating temperature range +5 to 40
°
C
Operating humidity range 5 to 90 % (no condensation)
Video system NTSC 525/60 Hz or PAL 625/50 Hz
Y output level 1 Vp-p (75
Ω
)
Cb output level 0.7 Vp-p (75
Ω
) Component video terminal
Cr output level 0.7 Vp-p(75
Ω
)
Y output level 1 Vp-p (75
Ω
)
S-video terminal
C output level 0.286 Vp-p (75
Ω
)
Composite video terminal 1 Vp-p (75
Ω
)
R output level 0.7 Vp-p (75
Ω
)
G output level 0.7 Vp-p (75
Ω
) SCART terminal (RGB video)
B output level 0.7 Vp-p (75
Ω
)
Frequency range 20Hz ~ 20kHz
Dynamic range Over 90 dB
S/N ratio Over 90 dB
Distortion Under 0.01%
Audio parameters
Output level 2 Vrms
Label
1. First class laser product. Rating labels on the back of the machine
2. Danger: when the internal functions are out of order or
damaged, opening the cover may cause unseen radioactivity.
It should be kept away from direct light.
3. Caution: Do not open the top cover. No internal part should be
maintained or serviced by the user. All such work should be
carried out by qualified personnel.
Dolby License
1 Product Manual LICENSE NOTICE
Manufactured under license from Dolby Laboratories
1 TRADEMARK ACKNOWLEDGEMENT
“Dolby”, “AC-3”, “Pro logic” and the double-D symbol are trademarks of Dolby Laboratories.
COPYRIGHT NOTICE
1 Confidential Unpublished Work. 
1992-1997 Dolby Laboratories, Inc. All rights reserved.
DTS License
1 "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Note
1 The specifications and design of this product are subject to change without notice, due to improvement.
CLASS 1
LASER PRODUCT