Sanyo DSR - 300 - Manual (Page 100)

English
99
(when optional interface board is installed)
2
MENU-SPECIFIC SETTINGS
Set the unit’s time and date as described below.
1
Select the “Month/Day/Year Hour/
Minutes” field.
The day of the week will be set automatically based on the
date.
2
Click [SET].
The current time is set.
1
Change the setting for daylight savings
time.
[Settings] (‹ indicates default setting.)
2
Set the date/time at which to switch
from standard time to daylight savings
time.
3
Set the date/time at which to switch
from daylight savings time to standard
time.
Synchronized operation will not be possible when time
differences exist between the unit and the connected
peripheral devices. By setting the external time as
described here, all devices connected to the clock adjust
terminal can be set to the same time.
4
Select “ADJUST TIME”.
Each day at the specified time, a signal will be output to
adjust the time of connected devices.
5
Click [SAVE].
The daylight savings time or adjustment time is set.
1. CLOCK SET
1
2
2. DAYLIGHT SAVING/EXT. CLOCK
SET
DAYLIGHT SAVING setting
Setting Description
‹ USE
Time is automatically adjusted to daylight
savings time.
NO USE
Time is not automatically adjusted to daylight
savings time.
EXT. CLOCK SET setting
4
5
1
2
3
e00_l8had_us_7.book Page 99 Wednesday, March 10, 2004 2:47 PM