Sanyo DSR - 300 User Manual

Page 108

Advertising
background image

MENU-SPECIFIC SETTINGS

2

English

107

(when optional interface board is installed)

Set the recording conditions to be used for pre-alarm
recording as described below. (JP. 112)

7

Select “ON” or “OFF” using “PRE-
ALARM RECORDING”.

[Settings]

z

When “OFF” has been selected for “ALARM
RECORDING”, this item will be displayed as “**” and
selection will not be possible.

8

Make a selection for “REC RATE”.

A 10.00/20.00, A 7.50/15.00, A 5.00/10.00, 3.75/7.50,
3.00/6.00, 2.50/5.00, 2.14/4.29, 1.88/3.75, 1.67/3.33,
1.50/3.00, 1.36/2.73, 1.15/2.31, 1.00/2.00, 0.83/1.67,
0.71/1.43, 0.63/1.25, 0.56/1.11, 0.50/1.00 (Unit: FPS)
(Default setting: A 5.00/10.00 FPS)

9

Set the duration for pre-alarm recording
using “DURATION”.

2 SEC, 3 SEC, 5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN,
2 MIN, 3 MIN, 4 MIN, 5 MIN, 10 MIN, 15 MIN
(Default setting: 1 MIN)

Set the alarm triggers (i.e., launch signals) that constitute
operation conditions for alarm recording as follows.

10

Select a launch signal for alarm
recording using “ALARM TRIGGER”.

[Settings] (‹ indicates default setting.)

z

External alarm detection
The term “external alarm detection” is used to describe
input of an external detection signal from a door switch
or the like to the unit's alarm input terminal.

z

Motion sensor detection
The term “motion sensor detection” is used to refer to
detection of motion on the monitor in accordance with
motion sensor settings.

z

When using a multiplexer, the recorder’s motion sensor
is disabled.

Setting pre-alarm recording

Setting

Description

ON

Performs pre-alarm recording.

OFF

Does not perform pre-alarm recording.

7

8

9

Setting alarm triggers

Setting

Description

‹

ALARM

Starts recording when an external alarm is
activated.

SENSOR

Starts recording when a motion sensor is acti-
vated.

ALARM AND
SENSOR

Starts recording when both an external alarm
and a motion sensor are activated simulta-
neously.

ALARM OR
SENSOR

Starts recording when an external alarm or a
motion sensor is activated
independent of the other.

10

e00_l8had_us_7.book Page 107 Wednesday, March 10, 2004 2:47 PM

Advertising