Sanyo DSR - 300 - Manual (Page 79)

NETWORK SET 5
78
English
(when optional interface board is installed)
SE
TTIN
GS <MAIN
MENU 2>
6
Move the cursor to “GATEWAY” and
press the [ ] button, then press the
[
], [ ], [ ], and [ ] buttons to
change the setting.
(Example: 0.0.0.0)
7
Move the cursor to “PORT” and press the
[ ] button, then press the [
], [ ], [ ],
and [ ] buttons to change the setting.
(Example: 00080)
When connecting the digital video recorder to a network,
check the following settings with the network administrator.
z
IP address
z Subnet mask
z Gateway
z Port number
Three access levels are setup for network connection, and
a password is set for each. Passwords can be between 4
and 8 alphanumeric characters.
z “ID” or “PASSWORD (4-8)” at the top of the screen is
the screen title. You cannot move the cursor to this
item.
Example: Setting “AB123456” to “ID1”
1
Press the [ ] or [ ] button to select
“ID1”.
[Settings]
2
Press the [ ] button.
The first password entry item “1” flashes.
Characters that can be entered in passwords: 0 to 9, A to Z
3
Press the [ ], [ ], [ ], and [ ] buttons
to input the password.
(1) Press the [ ] or [ ] button to select “A”, then press
the [ ] button.
(2) The second entry item “1” flashes. Press the [ ] or
[ ] button to select “B”, then press the [ ] button.
(3) The third entry item “1” flashes. Use the above
procedure to select “AB123456”.
4
When you have finished making the
setting, press the [ ] button.
5
Where necessary, use the same
procedure to set the “ID2” and “ID3”
passwords.
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
Password setting
Setting Description
ID1 Allows images to be monitored via the network.
ID2
Allows images to be monitored and the playback or
search/playback of recorded images via the
network.
ID3
Allows all of this unit’s operations and settings to be
performed.
e00_l8had_us_7.book Page 78 Wednesday, March 10, 2004 2:47 PM