Sony KWP 65HD1 - Manual (Page 11)

7
S-Link/CONTROL S cable
Sony cable for S-Link and CONTROL S
connections. These features are exclusive to
Sony products and allow greater control of
all Sony equipment.
Optical digital cable
Note:
• For S-Link and CONTROL S connections,
you can use the combined S-Link/
CONTROL S cable provided with some
Sony video equipment, or you can purchase
a separate S-Link/CONTROL S cable (RK-
G69HG).
Making Connections
To receive DTV channels
First, install a roof antenna and connect it to
the VHF/UHF (DTV) connector on the lower
panel at the rear of the projection TV. Second,
connect another antenna or cable line to the
VHF/UHF connector on the upper panel at
the rear of the projection TV.
Connecting directly to a cable or
an antenna
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see
A ); older homes will probably have 300 -
ohm twin lead cable (see B ); still other homes
may contain both (see C ).
A
• VHF only
or
• VHF/UHF
or
• Cable
B
• VHF only
or
• UHF only
or
• VHF/UHF
Antenna connector
(Rear of
projection TV)
VHF/UHF
300-ohm twin
lead cable
75-ohm
coaxial cable
75-ohm coaxial cable
Push into connection.
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
(Rear of
projection TV)
VHF/UHF
(Rear of
projection TV)
VHF/UHF
Push into connection.
C
• VHF
and
• UHF
Cable or antenna
This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
(Rear of projection TV)
VHF/UHF
Coaxial cable
(Rear of
projection TV)
AUX
VHF/UHF
CATV cable
Antenna cable
(continued)
(Rear of projection TV)
VHF/UHF
(DTV)
Roof antenna