Sony KWP 65HD1 - Manual (Page 58)

54
CABLE
Cable system
setting
AUTO
PROGRAM
Automatic
channel presetting
CHANNEL
SKIP
Skips unnecessary
channels
Select ON if your projection TV is connected to a cable system.
Select OFF if your projection TV is connected to an antenna.
AUTO SET UP will set CABLE to OFF automatically if a cable channel is not
available.
Select YES to signal the projection TV to automatically program all receivable
conventional TV channels. When all the receivable channels are stored, the
lowest numbered channel is displayed.
Select NO to cancel AUTO PROGRAM.
After AUTO SET UP, you can erase unnecessary
conventional TV channels from the channel preset
memory.
With the CHANNEL SKIP window open:
1 Move the joystick up or down to select the desired
channel. You can view the channel that is selected
with the CHANNEL SKIP menu in the center sub
screen. You can also use CH +/– or 0–9 and
ENTER buttons.
2 Press .
3 Move the joystick up or down to select YES, and press .
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
NO.
Using the CHANNEL SET
UP Menu
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 46.
To select the CHANNEL SET UP
menu:
Display
/
Highlight
/
Select
MENU
Using Conventional TV Features (continued)
(continued)
CHANNEL SET UP
CHANNEL SKIP
CHANNEL CAPTION
CABLE : ON
AUTO PROGRAM
FAVORITE CHANNEL : AUTO
CHANNEL FIX : OFF
Move Select Exit MENU
CHANNEL SKIP
Select a channel
2 :
3 :
4 :
5 :
6 :
7 :
8 :
NO 1 :
Move Select Exit MENU
NO
NO
NO
NO
NO
NO
NO