Sony KWP 65HD1 - Manual (Page 40)

36
TV (FUNCTION)
p
TV ANT
(AUX input)
TV POWER
CH +/–
VOL +/–
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Watching Conventional TV
Many Conventional TV features can be
accessed directly through the remote control.
The following chart will explain the function
of some buttons found on your remote
control.
To use the remote control for
conventional TV programs (VHF/
UHF and AUX inputs)
First, press TV ANT on the remote control so
that the TV FUNCTION indicator on the
remote control lights up in red momentarily.
The remote control functions for
conventional TV programs.
Make sure that the TV FUNCTION indicator
lights up in red each time you press the
buttons listed in the tables.
Using the White Labeled Buttons for Projection TV Operations
Activates the remote control for use with the projection TV.
Press once to activate the remote control for use with conventional TV
programs. Next, each further press changes operation between the VHF/
UHF input and the AUX input. (for detailed connection information, see
“Cable and antenna” on page 7 or “Cable box and cable” on page 8)
Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1,
VIDEO 2) appears on the screen, press TV/VIDEO until a channel number
appears.
Use for direct conventional TV channel selection. Press 0-9 to select a
channel (for example, to select channel 10, press 1 and 0). The channel will
change after 2 seconds, or you can press ENTER for immediate selection.
Press to scan through the channels (+ up or – down).
Press to adjust the volume (+ up or – down).
and ENTER
(continued)
0 9 -
Using Conventional TV Features
Lights up
in red. TV ANT
TV FUNCTION