Sony SNC-CS50N - Manual (Page 18)

O
per
at
ing
t
he
Came
ra
Configuration of Main Viewer
18
Main menu
Setting
Click to display the Administrator menu. (page 25)
You can operate this function only when logging in as
the administrator.
Home
Displays the welcome page.
Camera control section
Frame rate
(Displayed only when the camera image is in JPEG.)
Selects the frame rate to transmit images. (page 19)
View size
Selects the view size to be displayed. (page 20)
Digital zoom
Click to change the size of the digital zoom. (page 20)
Capture
(Displayed in the main menu when the Java applet
viewer is used.)
Click to capture a still image shot by the camera and to
store it in the computer. (page 20)
Trigger
(Displayed only when, the camera Viewer mode
(page 40) is set to Full and one or more triggers are
enabled in the Trigger menu (page 53).)
Select the function you want to use from the drop-down
list and click
. The selected function is activated.
The selectable functions are as follows:
– send the monitor image of the camera to an FTP server
(page 21)
– send the monitor image of the camera attached to an e-
mail (page 21)
– record the image on an ATA memory card (not
supplied) (page 22)
– switch the alarm output on/off (page 22)
– switch the Day/Night function on/off (page 23)
– play the audio file stored in the camera (page 23)
Transmission (TCP/UDP
transmission mode)
(Displayed only when the camera image is in MPEG4
and the ActiveX viewer is used.)
Each click switches the transmission mode of the video/
audio data between TCP mode, UDP (Unicast) mode,
and UDP (Multicast) mode. (page 24)
The last selected mode is saved in the computer, and will
stay selected for the next startup.
(Volume)
(Displayed when Microphone (page 31) is set to On.)
Drag the bar to adjust the volume.
When you click , the icon changes to and the
audio output stops. To output the audio, click again.
Note
If does not appear when the Java applet
viewer is used, Audio codec may not be set to G.711 (64
kbps) (page 31), Codec in the Alarm buffer menu is set
to MPEG4, or Java may not be installed correctly.
To check if Java is installed correctly, refer to “Java
applet viewer” of “About viewers” on page 16.