Sony SNC-CS50N - Manual (Page 47)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
47
consecutive number (2 digits), thus adding a 14-digit
number to the image file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 are added to the image file name.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Interval
Type the interval at which you want to send images to
the FTP server periodically. You can set the hour (H),
minutes (M) and seconds (S) between 1 second and 24
hours (one day).
Note
The actual interval may be longer than the set value,
depending on the image size, image quality setting, bit
rate and the network environments.
Effective period
Set the period during which the periodical sending is
effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period during which the
periodical sending is effective.
Click Schedule and the menu for the effective period
is displayed. (“Setting the Schedule — Schedule
Menu” on page 55)
OK/Cancel
See “Buttons common to every menu” on page 26.
Recording Images in
Memory
— Image memory Menu
When you click Image memory in the Administrator
menu, the Image memory menu appears.
By using the image memory function, you can record the
image and audio file, which has been shot being linked
with the external sensor input or with the built-in object
detection function, to an ATA memory card (not
supplied) inserted into the camera. The image file can
also be recorded periodically.
The recorded image and audio files can be found or
downloaded to the computer using the FTP server
function. (See “Downloading Images from the Camera
— FTP server Menu” on page 51.)
The Image memory menu consists of three tabs:
Common, Alarm recording and Periodical recording.
Notes
• The frame rate and operability on the main viewer
may be reduced during image storage.
• Set Image memory to Off when you remove the ATA
memory card from the camera or turn off the power of
the camera with the ATA memory card inserted.
• Before using an ATA memory card, format it using the
computer or using Format ATA memory card in the
Initialize tab of the System menu (page 29).
Common Tab — Setting the image
memory function
Image memory
To use the image memory function, select On.
ATA memory card
The current memory space of the ATA memory card
inserted into the PC card slot of the camera is displayed
on the right.