Sony SNC-CS50N - Manual (Page 58)

A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Object Detection Function — Object detection Menu
58
After the detection time, the location
where the car was parked is detected
as an unattended object.
Notes
• The colors and red frames shown in the monitor
display to indicate prospective unattended objects are
not displayed on the image files that are sent or
recorded linked to the unattended object detection
function.
• You can view an image in the main viewer during the
setting of the object detection function only when
MPEG4 is selected for Dual codec in the Video codec
tab.
• The unattended object detection may not work
correctly if the brightness of a scene changes
significantly, for example, when you shoot an outdoor
scene continuously from day to night.
• Before actual use, perform an operation test and
confirm that the object detection function works
correctly.
Common Tab
Use this tab to select moving object detection or
unattended object detection, and set the conditions for
detection while observing a camera image.
This is the same menu as that displayed when you click
Detection on Alarm sending of the e-Mail (SMTP)
menu, or on Alarm recording of the Image memory
menu.
Detection setting section
Select either moving object detection or unattended
object detection.
Moving object: Select when you want to perform
moving object detection. When this option is
selected, the moving object setting menu appears.
See “Setting items for moving object detection” on
page 58.
Unattended object: Select when you want to perform
unattended object detection. When this option is
selected, the unattended object setting menu appears.
See “Setting items for unattended object detection”
on page 60.
Setting items for moving object detection
The following setting items appear when Detection is
set to Moving object.
Monitor display
Set the active/inactive window while monitoring a
moving image.
Note
The image displayed on the monitor display has low
resolution.
Window1 to Window4 check boxes
When you check a check box, the corresponding
window (active or inactive window) appears on the
monitor display. You can change the position and size of
the window.
Active: To use the window as an active area in which
moving object detection is performed.
Inactive: To use the window as an inactive area in which
any moving object is ignored. Select Inactive to set
an inactive area inside an active window.
Detection setting section
Moving object detection setting section
Unattended object detection setting section
Active or inactive window