Setting the security - security menu, Setting the security — security menu, Setting the security – Sony SNC-CS50N User Manual
Page 41: Security menu, Security function, Default policy, Ok/cancel
A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Security — Security Menu
41
Setting the Security
— Security Menu
When you click Security in the Administrator menu, the
Security menu appears.
Use this menu to limit the computers that can access the
camera.
Security function
To activate the security function, select On.
Default policy
Select the basic policy of the limit from Allow and Deny
for the computers specified in the Network address/
Subnet 1 to Network address/Subnet 10 menus below.
Network address/Subnet 1 to Network
address/Subnet 10
Type the network addresses and subnet mask values that
you want to allow or deny access to the camera.
You can specify up to 10 network addresses and subnet
mask values. For a subnet mask, type 8 to 32.
Select Allow or Deny from the drop-down list on the
right for each network address/subnet mask .
Tip
The subnet mask value represents the bit number from
the left of the network address.
For example, the subnet mask value for “255.255.255.0”
is 24.
If you set 192.168.0.0/24 and Allow, you can allow
access from computers having an IP address between
“192.168.0.0” and “192.168.0.255”.
Note
You can access the camera even from a computer having
an IP address whose access right is set to Deny, if you
enter the user name and password set for the
Administrator boxes in the User menu.
OK/Cancel