Sony SNC-CS50N - Manual (Page 22)

O
per
at
ing
t
he
Came
ra
Recording a Still Image in the Memory / Controlling Alarm Output 1, 2
22
Recording a Still Image
in the Memory
You can capture a camera image as a still picture and
record on in an ATA memory card (not supplied).
To use this function, you need to insert the ATA memory
card into the camera, make Image memory active and
set the details in the Trigger menu of the Administrator
menu (page 54).
1
Display the image on the monitor window.
2
Select Image memory from the trigger drop-down
list.
3
Click .
The still image of the moment you click is captured,
and the image file is recorded on the ATA memory
card.
Controlling Alarm
Output 1, 2
You can control On (short-circuit) and Off (open) of
Alarm output 1, 2.
To use this function, you need to make Alarm output 1
or Alarm output 2 active in the Trigger menu of the
Administrator menu (page 54).
1
Display the image on the monitor window.
2
Select Alarm output1 or Alarm output2 from the
trigger drop-down list.
3
Click .
Each click switches the alarm output alternately
between On (short-circuit) and Off (open).
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.