Sony Ericsson GM47 - Manual (Page 124)

GM47/GM48 INTEGRATOR’S MANUAL
124
LZT 123 7263 R1C
3.28 AT+CR Service Reporting Control
Enables or disables display of intermediate bearer capability reports
during the handshake phase.
Intermediate Result Codes:
+CR: <serv>
3.29 AT+CRC Cellular Result Code
Command controls whether or not;
• the extended format of incoming call indication;
• or GPRS network request for PDP context activation;
• or notification for VBS/VGCS calls is used.
When enabled, an incoming call is indicated to the TE with unsolicited
result code +CRING: <type> instead of the normal RING.
Description Command Possible Responses
Set Service Reporting
Control
AT+CR=<mode> • OK
• ERROR
Show the current
setting
AT+CR? • +CR: <mode>
• OK
• ERROR
Show if the command
is supported
AT+CR=? • +CR: (list of
supported
<mode>s)
• OK
• ERROR
<mode> Description
0 Disable reporting. Default value
1 Enable reporting
Description Command Possible Responses
Set Cellular Result
Code option
AT+CRC=[<mode>] • OK
• ERROR
Show the current
setting
AT+CRC? • +CRC: <mode>
• OK
• ERROR
Show if the command
is supported
AT+CRC=? • +CRC: (list of
supported
<mode>s)
• OK
• ERROR