Network, 1 at*e2cd ericsson m2m cell description, 1 at*e2cd – Sony Ericsson GM47 User Manual
Page 209: Ericsson m2m cell description
209
LZT 123 7263 R1C
13. Network
13.1 AT*E2CD
Ericsson M2M Cell Description
Controls the presentation of an unsolicited result code E2CD: when
<n>=1, or when there is a change in one of the network cell parameters,
E2CD: <lac>,<ci>,<ta>.
Read command returns the status of result code presentation and several
values, which show the network cell parameters.
Location information <lac>, <ci> and <ta> are returned only when
<n>=1 and the ME is registered in the network. To know if the ME is
registered use the AT+CREG command. If the ME is not registered in
the cellular network an ERROR message is returned.
Description
Command
Possible Responses
Request network cell
description
AT*E2CD=<n>
• ERROR
• OK
Show the current
setting
AT*E2CD?
• *E2CD:
<n>,<lac>,<ci>,<ta>
• ERROR
Show if the command
is supported
AT*E2CD=?
• *E2CD: (list of
supported <n>s)
• ERROR
<n>
Description
0
Disable network location information unsolicited result
code. Default value
1
Enable network location information unsolicited result
code *E2CD: <lac>,<ci>,<ta>
<lac>
Description
String type
Two byte location area code in hexadecimal format
<ci>
Description
string type
Two byte cell ID in hexadecimal format