14 at*erip ericsson ring signal playback command, 14 at*erip, Ericsson ring signal playback command – Sony Ericsson GM47 User Manual
Page 147
4. AUDIO
147
LZT 123 7263 R1C
4.14 AT*ERIP
Ericsson Ring Signal Playback Command
Used to play one of the sound types which are available as ring signals/
message signals on the module. The signal volume may not be chosen
as “step”; with an increasing volume for each signal. If value 1 is chosen
for parameter <volume>, nothing should happen. Signal volume may be
chosen as a selected level.
Refer to the AT*ERIN command for the <sound type> parameter.
<sound type>
Description
0
Off. Not supported
1
Low ring signal
2
Medium ring signal
3
High ring signal
4
Mixed ring signal
5
Beep. Not supported
6
Alarm. Not supported
7
Calendar Tone. Not supported
8
Calendar Click. Not supported
9-10
Reserved. Not supported
11-20
Melody 1. Melody 10 reserved for preset melodies
21-30
Reserved. Not supported
31-38
Own melodies 1-8
39-5
Reserved for own melodies. Not supported
Description
Command
Possible Responses
Plays the selected
sound type at
specified volume level
AT*ERIP =
<volume>,<sound
type>
• +CME ERROR: <err>
• OK
• ERROR
Show if the command
is supported
AT*ERIP=?
• *ERIP: (list of
supported
<volume>s),(list of
supported <sound
type>s)
• OK
• ERROR
<volume>
Description
0
Off
1
Step. Not Supported
2-n
Volume setting