Sony Ericsson GM47 - Manual (Page 164)

GM47/GM48 INTEGRATOR’S MANUAL
164
LZT 123 7263 R1C
6.7 AT+CGQMIN Quality of Service Profile (Minimum Acceptable)
Allows the TE to specify a minimum acceptable profile which is
checked by the MS against the negotiated profile returned in the
Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the
(local) context identification parameter, <cid>. Since this is the same
parameter that is used in the +CGDCONT command, the +CGQMIN
command is effectively an extension to the +CGDCONT command.
The QoS profile consists of a number of parameters, each of which may
be set to a separate value.
A special form of the set command, +CGQMIN=<cid> causes the
minimum acceptable profile for context number <cid> to become
undefined. In this case no check is made against the negotiated profile.
Description Command Possible Responses
Set minimum
acceptable
profile
+CGQMIN=[<cid>
[,<precedence>
[,<delay> [,<reliability>
[,<peak>
[,<mean>]]]]]]
• +CME ERROR: <err>
• OK
• ERROR
Show the
current
setting
+CGQMIN? • +CGQMIN: <cid>,
<precedence>, <delay>,
<reliability>, <peak>,
<mean>[<CR><LF>+CGQMIN:
<cid>, <precedence>,
<delay>, <reliability>, <peak>,
<mean>[…]]
• OK
• ERROR
Show if the
command is
supported
+CGQMIN=? • +CGQMIN: <PDP_type>, (list of
supported <precedence>s),
(list of supported <delay>s),
(list of supported <reliability>s)
, (list of supported <peak>s),
(list of supported
<mean>s)[<CR><LF>+CGQMI
N: <PDP_type>, (list of
supported <precedence>s),
(list of supported <delay>s),
(list of supported <reliability>s)
, (list of supported <peak>s),
(list of supported
<mean>s)[…]]
• OK
• ERROR
<cid> Description
Integer type Parameter which specifies a particular PDP context
definition