Sony Ericsson GM47 - Manual (Page 188)

GM47/GM48 INTEGRATOR’S MANUAL
188
LZT 123 7263 R1C
10.12 ATI Identification Information
This command causes the DCE to transmit one or more lines of text,
followed by a final result code. As an option, <value> can be used to
select from among multiple types of identifying information as shown
in the table below.
This command provides compatibility with Microsoft Windows 95.
Examples
ATI=1
CXC1122112
ATI=5
Configuration Settings on Channel 0
&C: 1
&D: 0
*EENMEA: 0
+CGACT: 1,0
+CGATT: 0
+CGDCONT: 1,“IP”,“internet”,“”,0,0
+CGEREP: 0,0
+CGREG: 0,3
+CHSR: 0
+CHSU: 0
+CMEE: 1
+CMUX: 0,0,1,31,10,3,30,10,2
+CR: 0
Description Command Possible Responses
Execute ATI[<value>] <information>
<value> Description
0 Same information as +GMM command (model
identification)
1 Same information as +GMR command (revision
identification)
3 Modem model description
5 Active settings
7 Modem configuration profile (brief listing of the modem
functionality: fax classes, Bluetooth, IrDA, modem type,
etc.)
8 DCE hardware type version
9 PnP (plug and play) information