Samsung SWL-4000AP - Manual (Page 52)

48
12. User Access Control Setting Using AP Manager
① “User Access Control” is function that shows permission of using AP to MAC
ID Table of Wireless LAN Card installed on certain Stations among desktop or
notebook PC, which are connected AP. If you want to use this function, select
“User Access Control” on [Security] Dialogue Box.
② The selections of [Other Stations] are common setting to decide whether deny
or pass connection of Stations other than selected and managed by user.
③ When you permit connection to selected AP, enter MAC ID of Wireless LAN
Card on [Allowed Table]. Otherwise, enter MAC ID on [Denied Table]. All
settings of the other MAC ID other than entered MAC IDs in each table are set
by selecting “deny” or “pass” on [Other Stations] Box.
④ When MAC ID is added on each table, use [+] icon. On the other hand, when
deleted, use [-] icon.
⑤ When you want to permit specific MAC ID and deny the other, select “deny”
on [Other Stations] Box. Then, enter the MAC ID on [Allowed Table], which is
you want to permit.
“User Access Control” Setting
Deny
Pass