Samsung SWL-4000AP - Manual (Page 61)

57
⑤ If you want to confirm with line graph, select “Line” instead of “Histogram” on
Related Information Confirm Box.
⑥ In this case, if confirm is impossible due to increased number of packets with
wired and wireless transmission, increase scope of number of packet
transmitted per second(packet/sec) to confirm.
⑦ When selecting “SNMP MIB Ⅰ,Ⅱ Variable” on [Traffic Selection] Box,
basic information of Data Protocol Packet with wired and wireless transmission
can be confirmed on Related Information Confirm Box.
⑧ When “SNMP MIB Ⅰ,Ⅱ Variable” is selected, information such as IP,
TCP/UDP, ICMP, 802.11(Card) MIB can be confirmed. Because ICMP has
many MIB items, it can be confirmed by dividing ICMP1 and ICMP2.
Scope of Number of Packet
Transmitted per Second
Line Setting