Samsung SWL-4000AP - Manual (Page 74)

70
Enter the current password (Max. 30 characters) after “Enter current
password (Max. 30 characters):”. Then, press [ENTER :
↵
].
Enter the new password (Max. 30 characters) after “Enter new password
(Max. 30 characters):” . Then, press [ENTER :
↵
].
Enter the new password again after “Enter new password again:”. Then,
press [ENTER :
↵
].
Notice : Please keep this password at a safe place or keep it where it may not
get lost.
⑩ You must select “Save and reboot” on [ROOT] menu, after changing the
appropriate parameters by entering the new values.
By selecting the above menu, rebooting will occur automatically. The modified
parameters of the AP will be changed effectively after it is rebooted. After the
rebooting, you will view the following window to ask the password. If no
further changes are needed in your settings, you do not need to enter the
password.
==================================================
Samsung SWL-4000AP Configuration
==================================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Server [Menu]
4. Status [Menu]
5. Load default values
6. Save and reboot
CMD(t,p,h): 6
↵
Select Save and reboot