Samsung SWL-4000AP - Manual (Page 75)

71
⑪ After following all the steps mentioned above, you can close the
HyperTerminal window if there is no need for change or setting. Select [Basic]
menu if you want to confirm the settings.
==================================================
Samsung SWL-4000AP Configuration
==================================================
To configure the Access Point, the password is required.
Enter password :
==================================================
Samsung SWL-4000AP Configuration
==================================================
[ Basic ]
1. ESSID (A/B) AP_1 / AP_2
2. Channel (A/B) 5 / 10
3. DHCP Client Disabled
4. IP Address 16.3.60.208
5. Subnet Mask 255.255.255.0
6. Gateway Address 16.3.60.1
7. Description 2Slot_AP
Confirm Configuration