Samsung SWL-4000AP - Manual (Page 76)

72
19. Load default values Using RS-232C(COM Port)
⑫ Select “Load default values” on [ROOT] menu
⑬ If you want to set default values, enter “y(yes)” after “Do you really want
(y/n)?” then, press [Enter:
↵
]. AP configuration will return to default setting.
⑭ If all the steps above are executed correctly, a following sentence will be
displayed.
==================================================
Samsung SWL-4000AP Configuration
==================================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Server [Menu]
4. Status [Menu]
5. Load default values
6. Save and reboot
CMD(t, p, h): 5
All configured items will be set to the default values.
Do you really want (y/n)? y
All items were set to the default values.
Select“Load Load Load Load
Default values Default values Default values Default values”