SATO M10e User Manual
Page 6
Section 1: Overview
Page 1-2
PN 9001101 Rev. A
SATO M10e
GENERAL PRINTER SPECIFICATIONS
SPECIFICATION
M10e
Method
Direct or Thermal Transfer
Speed (User Selectable)
3 to 5 ips
75 to 125 mm/s
Print Module (Dot Size)
..0033 in.
.083 mm
Resolution
309 dpi
12 d/mm
Maximum Print Width
10.5 in.
266 mm
Maximum Print Length
16.5 in.
420 mm
MEDIA
Minimum Width
5.16 in.
131 mm
Minimum Length
1.7 in.
43 mm
Maximum Width
11.8 in.
300 mm
Type
Roll or Fan-Fold Die Cut Labels
Thermally Sensitive for M10eDT
Maximum Caliper
0.008 in.
0.21 mm
Roll OD (max) Face-In
7.8 in.
200 mm
Core ID (min)
3 in
76.2 mm
SENSING
See-Thru
Fixed, 0.9 in. (22.5 mm) left of center
Reflective Eye-Mark
Fixed, 0.2 in. (5 mm) from left label edge
Continuous Form
Not Used
RIBBON
Widths
6.5 in. (165 mm), 8.7 in. (220 mm), 10.7 in.(273 mm)
Length (max)
984 ft. (300 m)
Thickness
4.5 micron, Wound Face-In