SATO M10e - Manual (Page 74)

Section 7. Label Sheet Commands
Page 7-2 PN 9001101 Rev. A SATO M10e
Label Size
COMMAND STRUCTURE <ESC>PD,aaaa,bbbb,cc,dd
aaaa
bbbb
cc
dd
=
=
=
= Height of label in dots (480-3600)
Label width in dots (480-1600
Gap between labels in dots (00-99)
Number of label rows printed before cut.
Example: <ESC>PD,600,1020,0,2
Placement: Following the <ESC>A1 Media Size command.
Default: aaaa = 480, bbbb=480, cc=0, dd=1
COMMAND FUNCTION To specify the size of multiple up labels
PRINTER INPUT <ESC>A
<ESC>A106363060
<ESC>PD,600,1020,0,2
<ESC>V100<ESC>H100<ESC>P2<ESC>L0202<ESC>XMABCD
<Q>2
<ESC>Z
PRINTER OUTPUT The example specifies a label size of 600 dots printed on 1020 dot wide
media with not gap betweeh label columns and cut every two rows.
Special Notes 1. An error will occur when the Label Size specified differs from the A1
Media Size command; the format specification <ESC>_N command
and the <ESC>_D Variable Data command will be ignored.
2. The number of multiple-up labels in a row is automatically calcu-
lated from the width specified in the <ESC> A1 command and the
“bbbb” label size specified.
Cut position
d
(when d=2)
a
b
c
P
aper F
eeding Dir
ec
tion