SATO M10e - Manual (Page 79)

SATO M10e PN 9001011 Rev. A Page 8-1
SECTION 8.
OPTIONAL ACCESSORIES
This section contains instructions for using the following features:
• PCMCIA Memory Cards
• Cutter
PCMCIA MEMORY CARDS
DESCRIPTION
The Memory Card Option provides the connectors and interface board for one PCMCIA
memory cards slots. The printer memory can be expanded up to 16MB.
INSTALLATION
Instructions for installing the Memory Card Option are included with the installation kit.
Type SRAM or Flash-ROM
Applicable Specifications PCMCIA Version 2.1 (JEIDA Version 4.1)
Size Up to 4 MB SRAM or 16MB Flash ROM
Connector Pins 68
Battery Two years for SRAM type (approximately)
Write Protect Yes
Low Battery Detect Yes (SRAM only)