Star Trac E SERIES STEPPER E-ST - Manual (Page 11)

STAR TRAC E-ST STEPPER O WNER ’ S M ANUAL 11
A
SSEMBLY AND
S
ETUP
The following parts are included with the STAR TRAC E-ST STEPPER:
■ E-ST STEPPER Base frame assembly
■ Display Assembly
■ Left and right side handrails (Note: Both handrails are the same)
■ Hardware Kit 711-3182 includes:
8 handrail screws PN 110-0506
4 neck screws PN 110-3172
5/32” Hex key PN 290-0040
■ Owners Manual
■ Warranty Card
UNPACKING AND ASSEMBLY
NOTE: Inspect the shipping carton for any parts that may be missing BEFORE discarding the carton. Items can shift during trans-
portation, and may be accidentally discarded with the carton. If any parts are missing, please contact Star Trac Support at 800-503-
1221. Have the serial number of the Stepper, and the part number(s) of the missing parts ready so they may be shipped to you.
1. Unpack the Shipping Carton
Open the top of the Stepper Box, remove the handrail box (long, thin
box at outside edge) place aside. Remove Display assembly and
place aside. Remove remaining packing material, and carefully
remove from pallet base.
2. Open Display
Remove (2) M4 x 0.7 screws from back of display (retain for later
use) with a #2 Phillips screwdriver and separate the back of the dis-
play from the front.
M4 x 0.7
Screws