Sanyo SCP-4920 - Manual (Page 134)

Setting Up Screen Call
This feature enables you to screen incoming calls by using a recorded
annoucement, either one that is pre-recorded or one that you record.
You can also record the caller’s message into the Call Memo list.
To listen to the message, see “Reviewing Voice Recordings” on
page 117.
Activating Screen Call
To start Screen Call when you have incoming calls:
1. When the phone rings or vibrates, press Options (right softkey)
to display the options.
2. Highlight Screen Call and press .
To set Auto Screen Call:
1. Press to access the main menu.
2. Select Voice Services and press .
3. Select Screen Call and press .
4. Select Auto and press .
5. Select On and press .
6. Set the answering time by using numeric keys or by pressing the
navigation key up or down.
7. Press or OK (left softkey). (The icon is displayed on the
standby display.)
Tip: If a new caller’s message is waiting, appears on the display. The memos
recorded while activating “Screen Call” are shown with “ - ” or “ ! ” icon in the
Call Memo list (“ - ”: once played, “ ! ”: not played yet).
Tip: While the caller’s message is being recorded: Pressing stops recording
and disconnects the call, pressing answers the call.
Section 2I: Using Your Phone’s Voice Services 123