Sanyo SCP-4920 - Manual (Page 142)

Making a Ready Link Call (Group Call)
You can make a Ready Link call to all members in a Group entry,
which you have in your Ready Link List. You can communicate with
up to five members at a time.
To place a Ready Link Group call:
1. Press R-Link (right softkey) or press to access the Ready Link
List.
2. Press Go to (left softkey), highlight Personal Groups, and
press .
3. Highlight the group you want to call, and press and hold to
place the call and take the floor. (You will see R-Link calling... and
Connecting... followed by “You have floor.” Continue with the
Ready Link call as described above.)
Ⅲ To display a group member’s details, press , highlight
your desired group member, then press View (left softkey)
during step 3 above. Press
to make a Ready Link call to
the member.
Ⅲ If one of the group members takes the floor, you will see the
member’s name and Ready Link number on the display. The
phone beeps if you press the Ready Link/Recorder button
when another contact has the floor.
4. When the call is finished, press .
Tip: You can also make a Group Call after checking the group member. Press
to display group members, highlight <Call Group> and press and hold
during step 3 above.
Tip: Press the navigation key right or left to move your cursor to Redial in the
Ready Link list.
Section 2J: Using Ready Link 131