Sanyo SCP-4920 - Manual (Page 148)

Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Ready Link contact:
1. Press R-Link (right softkey) or press to access the Ready Link
List.
2. Press Go to (left softkey), highlight Personal List, and press .
3. Highlight <Add Contact> and press .
– or –
Highlight an entry and press Options (right softkey). Then
highlight Add Contact and press
.
Ⅲ If the Personal List is full, you will see a warning message on
the display. (Your phone can store a total of 200 Ready Link
Personal List or Personal Group contacts.)
4. Enter a name for the new contact and press . (This is the
name you will see when calling or receiving a call from the
contact.)
5. Highlight the R-Link Number field, enter the contact’s 10-digit
Ready Link number (their wireless phone number) and
press .
6. Press Save (left softkey) to save the new contact to your
Personal List.
Tip: You are not allowed to use the following symbols during step 4: “:”, “@”, “;”,
“/”, “*”, “)”, and “(”.
Section 2J: Using Ready Link 137