Sanyo SCP-4920 - Manual (Page 48)

Selecting a Tone Length
Longer tone lengths may be better for tone recognition when dialing
voicemail or other automated systems.
To select a tone length:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Sounds and press .
4. Select Others and press .
5. Select the menu under Tone Length and press .
6. Select Short or Long and press .
Setting a Start-up/Power-off Tone
1. Follow steps 1-4 in “Selecting a Tone Length.”
2. Select the menu under Start-up Tone or Power-off Tone and
press .
3. Select your desired tone and press .
Ⅲ Tone to select a tone. Scroll through available tones to hear
previews.
Ⅲ Get New to start up the browser so you can select a tone to
download (see page 104).
Tip: You can set the volume of Start-up Tone and Power-off Tone. See next page.
Using Voice Prompt
This feature allows you to hear voice prompts at Voice Recorder,
Screen Call setting, Voice Dial, etc. (default setting is On).
To deactivate this feature:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Sounds and press .
4. Select Others and press .
5. Select the menu under Voice Prompt and press .
6. Select Off and press .
Tip: When ringer volume is set to “Silence All,” voice prompts cannot be heard.
Section 2B: Controlling Your Phone’s Settings 37