Sanyo SCP-4920 - Manual (Page 144)

Receiving a Ready Link Call (1-to-1 Call)
1. Make sure your phone’s Ready Link mode is enabled (see
“Setting Ready Link Mode” on page 127).
2. When you receive a Ready Link call from a contact, “R-Link
Call,” the contact’s name, and the Ready Link number appear on
the display. (You do not need to take any action to answer the
call.)
3. If the person placing the call has kept the floor (held the
Ready Link/Recorder button), you will see the contact name
and Ready Link number along with “has floor.”, and you will hear
the caller speaking.
4. When the caller finishes speaking and releases the
Ready Link/Recorder button, you will see “Floor is open.” on the
display screen. Press and hold
to take the floor and reply to
the caller. (You will see “You have floor.” and hear a tone
confirming that you may speak.)
5. When the conversation is finished, press .
Receiving a Ready Link Call (Group Call)
1. When you receive a Ready Link call from one of the group
members, “Group Call,” the group member’s name, and the
Ready Link number appear on the display.
2. Continue with the Ready Link call as described previously.
3. When the conversation is finished, press .
Section 2J: Using Ready Link 133