Sharp PG-M10X - Manual (Page 24)

22
Basic OperationBasic Operation
Various functions while using the unit
Automatic Screen Adjustment
Press the AUTO SYNC button.
AUTO SYNC
The position and size of the input image will be
adjusted automatically in accordance with the
resolution.
• Operation is the same as with the AUTO SYNC button of the main
unit.
• When the optimum image cannot be achieved with Auto Sync
adjustment, use manual adjustments.
Freezing animated images
You can capture the desired frame of a moving picture.
Press the FREEZE button.
A still image of the current frame is displayed. To
restore the present picture, press the button again.
FREEZE
Tip
The still picture can also be enlarged (see page 23).
Turning off the image and muting the
sound temporarily
Press the AV MUTE button.
The image turns off and the sound is muted at the
same time. To restore the picture and sound, press
the button again.
AV MUTE
Adjusting the Volume
Adjusting the volume of the unit's speaker.
Press the VOLUME + button to increase the
volume or – to decrease.
VOLUME
KEYSTONE Adjustment
When distortion of the projected image
cannot be compensated with the adjusters,
press the KEYSTONE +/– button to adjust
accurately.
KEYSTONE
Using the KEYSTONE button to adjust the top
and bottom of a projected image.
The top and bottom of the projected will be
compensated, as shown in the diagram. If the menu
is displayed, distortion of the menu itself will not be
compensated.
When keystone adjustment is used, you may select to
enlarge the image to compensate for the adjustment or
leave the image size unaltered. (see page 32).
The following operations can be performed by opening the FLIP COVER of the remote control.
AUTO SYNC button
FREEZE button
AV MUTE button
VOLUME +/– button ENLARGE +/– button
KEYSTONE +/– button
AUTOSYNC FREEZE AV MUTE
ENLARGE VOLUME KEYSTONE