Sharp PG-M10X - Manual (Page 34)

32
Menu OperationMenu Operation
Initial Settings
Setting in Accordance With Image Content (continued)
Setting Keystone
This is used to set the height for keystone adjustment.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
ǡ / Ǡ
keys to select “VIEW”.
2
Display the frame, then use the cursor
/ keys to select “KEYSTONE”.
3
Use the cursor ǡ / Ǡ keys to select
“NORMAL” or “FULL”.
● Normal: Normal keystone correction
● Full: In this mode, the image is enlarged to fill the
screen vertically and then Keystone correction is
performed.
Setting the partial display position
Input a signal that is rated SXGA (XGA for the PG-M10S) to
COMPUTER input terminal and then set the partial display
position with “ASPECT” (see page 31) set to “REAL”.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
ǡ / Ǡ
keys to select “VIEW”.
2
Display the frame, use the cursor /
keys to select “PAN” and then press the
ENTER button.
3
Use the cursor / ,
ǡ / Ǡ keys to set the
display position.
Audio Muting
Audio only can be muted for each input.
This function is convenient when multiple video units are
connected to this unit.
1
Select the input to be muted (page 20).
2
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
ǡ / Ǡ
keys to select “SETUP”.
3
Use the cursor / keys to select
“SOUND MUTE”, then use the cursor
ǡ / Ǡ
keys to set muting to “ON” or “OFF”.
Selecting the Background
Two different backgrounds can be selected for projection
when there is no signal input.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
ǡ / Ǡ
keys to select “SETUP”.
2
Use the cursor / keys to select
“BACKGROUND”.
3
Use the cursor ǡ / Ǡ keys to select one of
the following backgrounds.
● Blue ● Black
Auto Gain
Brightness and contrast are adjusted automatically.
1
Select the input to be set for auto gain (page
20).
2
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
ǡ / Ǡ
keys to select “SETUP”.
3
Use the cursor / key to select “AUTO
GAIN”, then use the cursor
ǡ / Ǡ keys to
set “ON” or “OFF”.
To close the menu
Press the R-CLICK/EXIT button.