StorageTek 9710 - Manual (Page 59)

MR0012J 9710 System Assurance Guide 4-19
SCSI Cabling
AS/400 Data Path
The AS/400 special SCSI cables come in two models: above floor, and under
floor (plenum). They must be used with the AS/400, and any other system
which has similarly designed SCSI connectors.
Note: If you already have standard 68–68 pin SCSI cables on site, then order
only the IBM AS/400 Interposer connector, Part Number 05H3834. This
IBM adapter connects standard 68–68 pin SCSI cables to the AS/400. In
that case, do not order any additional cables.
Table 4-10. SCSI Cables and Adapters for AS/400 Path
x Description Part Number Quantity
❑
IBM 68–68-pin AS/400 interposer connector is an
adapter connector to attach standard 68–68-pin
SCSI cables to the AS/400. Order this connector if
you already have standard SCSI cables on site. If
you do not, order only the cables below. 05H3834 (order
from IBM) ________
❑ AS/400 special 68–68-pin SCSI cable, 3 m (10 ft)
goes above floor 100821102 ________
❑
AS/400 special 68–68-pin SCSI cable, 3m (10 ft)
goes under floor (plenum) 100821111 ________
❑
AS/400 special 68–68-pin SCSI cable, 6 m (20 ft)
goes above floor 100821103 ________
❑
AS/400 special 68–68-pin SCSI cable, 6 m (20 ft)
goes under floor (plenum) 100821112 ________
❑
AS/400 special 68–68-pin SCSI cable, 24 m (78.7 ft)
goes above floor 100821109 ________
❑
AS/400 special 68–68-pin SCSI cable, 24 m (78 ft)
goes under floor (plenum) 100821118 ________