StorageTek 9710 - Manual (Page 75)

MR0012J 9710 System Assurance Guide A-1
A Site Planning Information
This appendix provides specifications and floor space requirements.
The following table lists the dimensions and weight of the LSM. Refer to your
drive publications for the weight of the drives and cartridges and add the
weights to the weights in the table.
Table A-1. 9710 Dimensions and Weights
Height 1830 mm (72 in.)
Width with covers 1490 mm (59 in.)
Depth 790 mm (32 in.)
Depth with expansion door 1020 mm (40 in.)
Weight of base unit with arrays 339 kg (747 lbs)
Weight of base unit with expansion door
and arrays 375 kg (826 lbs)
Table A-2. LSM Power Specifications
Power cable U.S./Canada:
100 VAC UL/CSA power cable
International:
200–240 VAC HAR power cable
Input voltage range
Nominal voltage
100–254 VAC
120 or 240 VAC
Power configuration U.S./Canada:
Single phase 100 VAC, 47–63 Hz, 20 A Service, 3-wire
International:
Single phase 200–240 VAC, 47–63 Hz, 10 A Service, 3-
wire
Power consumption 200 W
Maximum heat
output 683 Btu/hr